Blog

Ripple UI v12.3 Adds Colour Maps and New Hardware Support

Ripple UI v12.3 landed on 3 November with support for the Seeed Wio Tracker L2 Pro and the MeshPager X2, plus dithered colour maps for e-paper devices. On 23 October, the MeshCore blog published a field test of Companion Repeat Mode on the Wio Tracker L1 Pro. The two posts describe handhelds with offline maps that can also relay messages.

Ripple UI v12.3 brings colour maps to e-paper

The headline feature is map handling on e-paper screens. The T-Deck Max, T-Deck Pro and T5 Pro firmwares can now switch between a dedicated black-and-white tileset (the /tiles-bw folder) and standard colour OSM tiles in /tiles. The colour tiles are dithered, as covered in the Ripple UI v12.3 release post.

Colour-to-greyscale translation is never perfect, so the contrast threshold can be adjusted on the fly with ALT+1 through ALT+9. That fixes the usual e-paper complaint of coastlines and roads turning into grey mush.

Map tiles over WiFi, with a catch

Tiles can now download over WiFi and save to SD card as the user zooms and pans. There is no bulk download yet, so a map area has to be browsed once before it works offline. On e-paper devices, downloads only apply to the colour tileset.

WiFi is configured from a dedicated screen in the Extra menu, and changes need a reboot. That is a bit cumbersome, but it keeps the radio off from boot, which saves battery.

New hardware and a compass arrow

Two devices join the supported list: the MeshPager X2 and the Wio Tracker L2 Pro. The L2 Pro is the colour touchscreen model, and community clips show the offline map running on it in one demo of MeshCore Solo and on Cairn firmware in another. Browse the devices page for the wider hardware lineup.

GPS navigation gets a direction arrow too. While moving, a blue arrow shows heading. Devices with a digital compass (X2, L2 and M9) show it even when standing still, as long as the unit is held flat and calibrated from the new Calibrate Compass menu entry.

Three intermittent crash bugs tied to multi-byte paths and the rxlog diagnostics screen are fixed, along with some multi-byte path issues affecting adverts.

The release also starts retiring the old Ripple network profile type. New Ripple profiles can no longer be created, though existing ones still load. MeshCore proper is the network that matters now.

Companion Repeat Mode gets a field test

The Companion Repeat Mode guide answers a practical question: what happens when a hiking group stretches beyond direct range and no repeater is nearby? Normally companions don’t forward packets. Repeat Mode lets one act as a temporary relay, enabled in the app’s radio settings without reflashing.

MeshCore limits the feature to specific off-grid radio configurations, so portable clients don’t add forwarding traffic to a public mesh. European users should pick a setting that is legal in their region, and agree on it before leaving coverage.

The test used three L1 Pro units, with the relay about 4 km from each endpoint. Placement mattered more than distance. With the relay among trees, 4 of 10 messages got through. Moved to higher, more open ground at the same distances, delivery rose to 8 of 10. The same lesson applies to rooftop repeaters.

Regional tooling keeps growing

Norway’s community built MeshNO, a region configurator. Drop a pin and it works out which scopes a repeater should serve, from Europe down to Norway, landsdel, fylke, kommune, city and nearby airport. A new repeater gets its config over USB straight from the browser, and the tool can also configure over LoRa.

Elsewhere, hobbyists keep stretching the hardware list. One developer published Barnacle, MeshCore firmware for the old IoWE Helium Mapper, and another is porting MeshCore to the Arduino Nesso N1. Both are experimental. The MeshCore app v1.51.0 added pinned quick messages and a My Location button on map screens.

Planning tools exist, with limits. One user asked for a repeater planning tool that shows the combined coverage of several repeaters at once. Replies pointed to the Meshtastic Site Planner, ve2dbe.com, meshpeaks.com, Meshmapper and a built-in Antenna Coverage tool, with the caveat that terrain-only models ignore buildings and trees. For now, the community map shows what is already on air, and the get started guide covers the basics for newcomers.